UPS RACK CODE 1000 1KVA/UPLI-LI100CO-AZ01B NJOY

CODE SERIES
THE SECRET CODE FOR OPTIMAL PROTECTION
Code Series is the line-interactive topology UPS recommended for situations when a simple, affordable, rack mountable system is necessary without any other specific requirements. It is a perfect solution for security / CCTV systems and environments without heavy loads like small servers, desktops and all peripherals with a rack management installed. This line-interactive UPS system protects your valuable equipment from damage, downtime and data loss.

Line-Interactive topology
Code Series has an intermediate level power protection due to its line interactive topology where the UPS maintains the inverter in line and redirects the battery’s DC current path from the normal charging mode to supplying current when power is lost. Code produces a simulated sine wave output which is suitable for virtually all electronic business applications. This type of waveform keeps the cost low and resembles very close to the utility power in terms of performance.

High 95% efficiency in line power mode
Code Series uses up to 95% of the electrical input to power the connected loads, with a very small percentage of power waste. Higher efficiency translates in lower losses of electricity as heat, as a result Code will have an increased service life.

Rack installation option
Code supports 2U rack mounting and vertical tower or horizontal desktop placement. The rack mounting comes in handy in case of space saving or in case of multiple UPSes are needed for protection.

Reliable battery back-up
This UPS unit comes with internal batteries installed and ready to run. On typical use, it usually takes up to 4-6 hours to recharge the batteries to 90%.

See the difference
The illuminated LCD screen shows a variety of helpful data, including input voltage, battery capacity, power status, battery status and AVR status. You can adjust the brightness of the LCD backlight and rotate the LCD to match the orientation of the UPS system.

USB port communication
Free management software is available through the USB port to enable unattended system shutdown and multiple power management options.

Software management
Take control over your automated electronic architecture through the software management available on Code. You can decide all operations that are being done and establish the time frame.

Coded protection
Frequent switching to battery drains reserve power and shortens battery life. This UPS has a feature called automatic voltage regulation (AVR) that solves the problem, along with Overload, Discharge & Overcharge protection. AVR corrects brownouts and over voltages without using battery power.

• Software management
• LCD Display
• Rack design
• Auto-Restart while AC is recovering
• Excellent microprocessor control guarantees high reliability
• Boost and buck AVR for voltage stabilization
• Off-mode charging
• Cold start function
• User-friendly LCD